6 Responses to “How can broadband internet connection is made to both the computers which are in networking?”

1. mlaheji on September 12th, 2009 4:05 am
   

   DSL Feedback:

   Everything you need to do.

   Hope it helps
2. mackyinc on September 13th, 2009 10:03 am
   

   DSL Feedback: good thing your using windows xp because i forgaot all about win98 ok heres what you will do, if the networking is not a problem (i mean file sharing and stuff) its easy to share the internet.
   click on stat> control panel> netwrk connections>

   then right click on your dsl connection> click roperties> and on the advance tab> check allow other users to connect to this computers internet connection.
   that should do the trick.
3. hiallherenthere on September 16th, 2009 9:04 am
   

   DSL Feedback: If you want to surf at a single computer at a time, unplug the USB of XP and plug it to Win98 system….
   If you want to surf both at a time get a proxy software downloaded in the XP and connect the 98 pc to XP with the help of LAN
4. cuite on September 17th, 2009 4:13 pm
   

   DSL Feedback: you words are of a mix up but here is how you do this

   this is what you need 1 router and if the other pcs are desktops wireless usb adapeter’s
   and this is how you set all that up
   you conncet the ethernet cable to the back of the router on the port that is marked ethernet then you take the other end of the cable to the ethernet card on on the back of your pc you conncet it to the port marked ethernet

   then you conncet the other cable to the back of the ruter port that is marked DSL then you take that cable to the fillter box conncet it to the port marked on the fillter marked DSL
   then you conncet the filter cable box to your phoneline box
   conncet the power cable to the router and put the power on
   now you put in the cd driver that came with your router
   and you install the network drivers
   now you need to set up a network id & password on the router
   you will be told how to do all that when you install the drivers & software for the router
   when you have install the drivers and software fo r the router
   your need to restart the pc
   when your back at the desktop
   you will see a network icon in the taksbar by the pc time
   if it has a red X on it right click it and click on enable
   if you dont see a network icon in the taskbar
   click on start/control panel
   click on
   network and internet connections
   icon
   then click on network connections icon
   now right click the
   local Area connection
   icon and click on properties
   tick the box
   show icon in notification ares when connected
   tick the box
   notify me when this connection has limited or no connectivity

   now click on
   then authentication tab at the top

   tick the box
   enable IEEE 802.1x authentication for network
   tick the box
   authenticate as computer when infomatiion is available
   then right click
   local Area connection
   and click on enable
   now your router internet will log online with in 45 seconds
   when your router is online you conncet your phoncable to the filter marked
   phone

   now when your router is online

   then you need to get in the router home page and click on the wireles lan icon
   and you set up a network id for the laptop
   and a security wpa key not a wep key dont use that one use wpa key
   then you put a wireless usb adapter on the laptop you install the network drivers on the laptop for the wireless usb
   then you click on the network icon in the taskbar by the time on the laptop right click on it go to properties then you click on view wireless networks then you click on advanced tab you put in the network id and security key that u set up on the router home back then you click apply & ok then you click on view wireless network’s your see your network id click on that then click on conncet

   if you have a wireless card in the laptop just

   click on the network icon in the taskbar by the time on the laptop right click on it go to properties then you click on view wireless networks then you click on advanced tab you put in the network id and security key that u set up on the router home back then you click apply & ok then you click on view wireless network’s your see your network id click on that then click on conncet

   if you cant set that up

   your be better off if you get you (isp)server to help you set all that up

   also get this done

   REMEMBER TO GET THIS DONE IF YOU DONT THEN YOUR INTERNET IS GOING TO HAVE PROBLEMS
   TO STOP ALL THAT FROM GOING ON your network

   you do make sure you call your (isp) or this will happen
   is your pc still slow & your internet you have done a full system scan
   with your anit virus /anti spyware you even defragmenter your hard drive
   done a scan disk but your pc is still slow and your internet is not as good
   then you need to check your router it dont mater what router you have

   people in the vicinity is on your network

   you call your (isp)
   GET THIS SET TO DISABLED

   (GAMES & APPLICATION SHARING )
   it dont matter what router you have you need to get
   (GAMES & APPLICATION SHARING ) set to disable

   is your router safe?
   you need to call your (isp) server
   they have to get you in to your router home page
   then from there ..copy & paste the router home page
   into a notepad then save that to a back up cd

   now from there they have to take you to the part
   where (GAMES & APPLICATION SHARING ) is
   then you click on ( GAMES & APPLICATION SHARING) icon
   then at the top of the page on the right your see
   configure.. you click on configure
   then you .. UN-TICK .. the box ( GAMES & APPLICATION SHARING)
   that is ticked there …
   then you click look down the page your see
5. purnendu1001 on September 19th, 2009 6:58 am
   

   DSL Feedback: Its really easy.
   First you have to share the broadband connection, to do that you have to go to the properties of My Networking Places, then go to the properties of the dial up which connects broadband, go to the Advance tab and click on share.
   After sharing your LAN card address will autometically assign to 192.168.0.1, when ask for that click on yes.
   Now go to the second PC.
   Then properties of My networking places
   then propoerties of Local area connection
   double click on “Internet Protocol(TCP/IP)”
   asgine IP Address=192.168.0.2
   Subnet Mask= 255.255.255.0
   Gateway=192.168.0.1
   DNS= 192.168.0.1
   And you are done.
6. Xican 1 on September 19th, 2009 4:05 pm
   

   DSL Feedback: I’m amazed on all the questions posted here.
   Here’s my 2 cents in this matter:

   Broadband is usually a term for Cable Internet, if that’s what you have, then the easiest solution will be to get a router (Netgear are better than any other brand and I’ve tested them for over 9 years), now days any router includes wireless, firewall and switch services.
   Connect the router’s INTERNET/WAN port to the Cable Internet Modem’s ETHERNET/LAN’s port with an Ethernet (LAN) cable and connect both computers to the LAN ports of the router.

   By default, your Internet should be available on both computers without any modification/configuration on the router or the computers.

Feel free to leave a comment...
and oh, if you want a pic to show with your comment, go get a gravatar!